Performing the calculation

The procedure for performing of the calculation

  1. Call function Calculation:

    1. either using menu function Tree > Calculation, Mesh > Calculation,

    2. or using tree menu function Calculation, Mesh > Calculation.

  2. The Calculation settings dialogue opens on the screen (see below).

  3. Adjust the parameters for calculation.

  4. Confirm with [OK].

  5. The calculation is started and solver report dialogue is opened on the screen (for small models the dialogue may just flash).

  6. When the calculation has been finished, close the calculation report dialogue.

  1. Proceed to evaluation of result.

Note: All the calculation parameters may be adjusted in the "Solver Setup"